66
VPN configuration
NN47928-500
NN47928-500
7
In the
Traffic
Selector
box, in the
Local
Address
field, enter the source IP
address of outbound traffic.
8
In the
Local
Address
Mask
field, enter the local network mask of outbound
traffic.
9
In the
Remote
Address
field, enter the destination network address of
outbound traffic.
10
In the
Remote
Address
Mask
field, enter the destination network mask of
outbound traffic.
11
From the
Protocol
list, select
Any
.
12
In the
IKE
(Phase 1) Proposal
box, from the
IPSec
Encryption
list, select an
encryption algorithm.
13
From the
IPSec
Authentication
list, select
an authentication algorithm.
14
From the
DH
Group
list, select a group
.
15
From the
Exchange
Mode
list, select
Main
or
Agressive
.
16
From the
Life
Time
list, select the
Seconds
,
Minutes
, or
Hours
.
17
In the
Life
Time
Value
field, enter the life time value.
18
From the
Peer
Identity
Type
list, select
IPV4
for the peer identity type.
19
From the
Peer
Identity
Value
list, select the peer identity value.
The list contains the Remote Identity values entered on the VPN Global Settings
screen.
20
From the
Local
Identity
Type
list, select
IPV4
for the local identity type.
21
In the
Local
Identity
Value
field, enter the local identity value.
22
In the
IPSec
(Phase 2) Proposal
box, from the
Protocol
list, select
ESP
or
AH
.
23
From the
Encryption
list, select an encryption algorithm.
24
From the
Authentication
list, select an authentication algorithm.
25
From the
IPSec Mode
list, select
Tunnel
.
26
From the
Preferred
Forward
Secrecy
list, select a PFS option.
27
From the
Life
Time
list, select the
Seconds
,
Minutes
, or
Hours
.
28
In the
Life
Time
Value
field, enter the life time value.
29
Click
Apply
.
End
Variable definitions
The following table describes the variables and values for configuring IKE preshared secret.
Variable
Value
Policy Action
Select this check box to create a policy action.
Policy Name
Type a IPsec policy name. Each policy must have a unique name.
Existing Policies
Select an existing policy for the IPsec policy.
Summary of Contents for BSG12aw 1.0
