Nortel Express Call Center User Manual Download

Page: 456 / 638

456

Symposium Express Call Center

Data dictionary

Standard 2.0

Pegging:

Symposium Express Call Center calls are pegged against the

Master_Script or primary application, depending on the location of the call in
the system, and against the answering skillset.

Triggers:

Delays begin when the call is queued at the skillset and end when it is

answered. If a call is requeued to the same skillset, the delay begins when the
call is first queued.

Restriction:

This statistic does not include ACD and NACD calls, because

delay statistics are not available for these types of calls.

Type:

int

Length:

CallsOffered

Description:

The number of Symposium Express Call Center calls offered to

this skillset. This statistic is not incremented if the same call is offered to this
skillset again.

Triggers:

Calls are pegged against the Master_Script application upon arrival,

and against a primary application when the Master_Script application hands
over control.

Note:

If a call is offered to multiple skillsets, this statistic is pegged multiple

times.

Type:

int

Length:

MaxAnsweredDelay

Description:

The wait time experienced by the Symposium Express Call Center

call that waited the longest before being answered.

Pegging:

Symposium Express Call Center calls are pegged against the

Master_Script or primary application, depending on the location of the call in
the system, and against the answering skillset.

Restriction:

This statistic does not include ACD and NACD calls, because

delay statistics are not available for these types of calls.

Type:

smallint

Length:

Summary of Contents for Express Call Center































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Express Call Center

Reviews:

Related manuals for Express Call Center

Brands by name

Popular brands

Nortel Express Call Center, User Manual

Search results

Summary of Contents for Express Call Center

Reviews:

Related manuals for Express Call Center

Brands by name

Popular brands