3
FastRAD Installation Guide
Before you
start
❑
Make sure you read and follow the instructions in this
guide.
❑
Make sure you have the necessary tools to complete the
installation. A Special parts check list is provided in this
guide.
❑
Make sure all equipment in the FastRAD package is
accounted for. A Package check list is provided in this
guide.
❑
Make sure the necessary environment and electrical con-
ditions are met. An Environment check list and list of
Electrical requirements are provided in this guide.
Important
: Only one FastRAD can be connected to a KSU.
Environment
check list
The FastRAD installation area should be:
❑
clean, free of dust, dry and well ventilated
❑
between 0
°
and 50
°
Celsius (32
°
to 122
°
Fahrenheit)
❑
non-condensing relative humidity between 5% and 95%
❑
within 800 m (2600 feet) of the Norstar KSU
Note
: When using a Norstar 3X8 KSU the FastRAD must be
installed within 305 m (1000 feet).
❑
free of Bridge taps on the FastRAD KSU TCM loop
❑
free of Loading coils on the FastRAD KSU TCM loop
Package check
list
Make sure the package contains:
❑
the Norstar FastRAD
❑
an RJ-11 teladapt cord
❑
a power supply with a barrel connector
❑
a paper template (for mounting)
855601 Book : 855601 Guide Page 3 Wednesday, October 29, 1997 4:06 PM
Summary of Contents for FastRad
Page 1: ...FastRAD Installation Guide...
Page 2: ......
Page 10: ...vi FastRAD Regulations...
Page 34: ...24 FastRAD Installation Guide...
