52
Media Application Server platform
IBM eServer BladeCenter
component
Quantity
Description
Blower module
2
One pair of variable-speed, hot swappable
blower modules for cooling redundancy.
If a blower module fails, the remaining
blower module continues to cool the IBM
eServer BladeCenter and the IBM HS20
blade servers.
IBM HS20 blade server
Up to 14
Each IBM eServer BladeCenter supports
up to 14 IBM HS20 blade servers. The
number of IBM HS20 blade servers
depends on the server configuration.
Acoustic module (optional)
1
An optional acoustic attenuation module is
available for the IBM eServer BladeCenter
for environments where noise reduction is
essential. The acoustic module installs on
the back of the IBM eServer BladeCenter
unit, covering the blower modules, and
partially covering the other IBM eServer
BladeCenter modules. The acoustic
module is not provided as part of the
standard IBM eServer BladeCenter
chassis.
The rear of the IBM eServer BladeCenter (see
Figure 8 "IBM eServer
BladeCenter chassis (rear)" (page 53)
) contains redundant power supplies
and cooling fans. The chassis is controlled by an IBM eServer BladeCenter
Management Module that is paired with another Management Module
in the same chassis for redundant operation. The chassis also provides
two-Gigabit Ethernet switch modules to interconnect the 14 blade servers,
and to provide external network connectivity.
Nortel Media Application Server
Media Application Server Planning and Engineering
NN42020-201
01.04
Standard
4.0
27 July 2007
Copyright © 2007, Nortel Networks
.