Hardware platform options
59
The following table provides details about the blade server indicators
and controls shown in
Figure 11 "IBM HS20 blade server indicators and
controls" (page 58)
.
Table 12
An explanation of the IBM HS20 blade server indicators and controls
Indicator or
control
Description
Fault (Error)
The system has detected a fault on this blade server.
Information
Information has been placed in the IBM eServer BladeCenter
System Error log.
Location
This is turned on by the system administrator (through the IBM
eServer BladeCenter Management Module Web interface) to
aid in locating the blade in question.
Activity
Disk or network activity is present on the blade.
Power
The blade server has power.
Media Select
Button
This button gives the individual blade server to have access to
the shared CD ROM or floppy disk drive unit.
Console
Select Button
This button gives the individual blade server access to the
shared console interface
Power
Button
This button supplies power to, or removes power from the
individual blade server.
IBM HS20 Dual SCSI Expansion Unit
The IBM HS20 Dual SCSI Expansion Unit mounts to the IBM HS20 blade
server (forming a two-slot wide server unit), and provides two hot-swappable
SCSI drive bays (see
Figure 12 "Dual SCSI Expansion Unit" (page 60)
).
Communication between SCSI drive bays, and the IBM HS20 blade servers,
travels over the IBM eServer BladeCenter backplane bus.
The Expansion Unit is supported only by the NTVW01CG HS20 Blade.
Nortel Media Application Server
Media Application Server Planning and Engineering
NN42020-201
01.04
Standard
4.0
27 July 2007
Copyright © 2007, Nortel Networks
.