Hard-copy technical manuals
11
brackets ([ ])
Indicate optional elements in syntax descriptions.
Do not type the brackets when entering the
command.
Example: If the command syntax is
show ip interfaces [-alerts]
, you can
enter
either
show ip interfaces
or
show ip interfaces -alerts
.
ellipsis points (. . . )
Indicate that you repeat the last element of the
command as needed.
Example: If the command syntax is
ethernet/2/1
[<parameter> <value>]... ,
you enter
ethernet/2/1
and as many
parameter-value pairs as needed.
italic text
Indicates variables in command syntax descriptions.
Also indicates new terms and book titles. Where
a variable is two or more words, the words are
connected by an underscore.
Example: If the command syntax is
show at
<valid_route>,
valid_route is one variable and you substitute one
value for it.
plain Courier text
Indicates command syntax and system output, for
example, prompts and system messages.
Example:
Set Trap Monitor Filters
separator ( > )
Shows menu paths.
Example: Protocols > IP identifies the IP command
on the Protocols menu.
vertical line ( | )
Separates choices for command keywords and
arguments. Enter only one of the choices. Do not
type the vertical line when entering the command.
Example: If the command syntax is
show ip {alerts|routes}
, you enter either
show ip alerts
or
show ip routes
, but not
both.
Hard-copy technical manuals
You can download current versions of technical documentation for your
Ethernet Routing Switch 8300 from the Nortel customer support web site
at
www.nortel.com/support
.
Nortel Ethernet Routing Switch 8300
Installation — AC Power Supply
NN46200-301
03.01
Standard
4.0
27 August 2007
Copyright © 2007, Nortel Networks
.
