SMDR6 Installation Guide 5
Testing SMDR6
Test SMDR6 by dialing the Administration Feature Code from any
Norstar telephone.
1.
Press
ƒ·•¤
. The display shows:
Note
: On M7100/M7208 telephones, the second line of the display is
not shown.
2.
Press
QUIT
or
®
.
Troubleshooting
Problem
: SMDR6 Interface Unit will not respond to Feature Code.
Note
: Refer to the SMDR6 System Coordinator Guide for
programming information.
Resolution
: Make sure you are using an M7100, M7208, M7310 or
M7324 telephone to program the unit.
or
Check that the KSU port is operating by plugging in a working Norstar
telephone. If the port is not operating, plug the SMDR6 into another
port.
Wait 60 seconds after plugging the unit into a new port. It can take up
to 60 seconds for the unit to become operational.
Refer to the Station Message Detail Recording 6 System Coordinator
Guide for additional troubleshooting information.
SMDR6 Admin
NEXT QUIT
888385_01 Install.book Page 5 Wednesday, November 11, 1998 2:45 PM
Summary of Contents for Norstar SMDR6
Page 1: ...SMDR6 Installation Guide 888385_01 Install book Page 1 Wednesday November 11 1998 2 45 PM...
Page 2: ...888385_01 Install book Page 2 Wednesday November 11 1998 2 45 PM...
Page 14: ...6 SMDR6 Installation Guide 888385_01 Install book Page 6 Wednesday November 11 1998 2 45 PM...
Page 15: ...888385_01 Install book Page 1 Wednesday November 11 1998 2 45 PM...
