1-346 Trouble locating and clearing procedures (continued)
297-8021-544 Standard 14.02 May 2001
Running a C7BERT for high-speed links
(continued)
5
Determine the state of the DLIU associated with the link to be tested.
Note: The DLIU state is visible under the Stat header to the right of the
Resource header.
Note: The DLIU consists of two peripherals: the high-speed link router
(HSLR) and the high-speed link interface unit (HLIU).
6
To enter the PM level of the MAP display, type
>PM
and press the Enter key.
Example of a MAP display:
7
To post the HLIU, type
>POST HLIU dliu_no
and press the Enter key.
where
dliu_no
is the number of the DLIU connected to the link you want to test
Note: The number of the DLIU is under the Resource header of the MAP
display. In the example in step 4, the HLIU connected to link 1 is 13.
Example of a MAP response:
If the DLIU state is
Do
SysB
,
ManB
, or
OffL
step 6
InSv
, or
ISTb
step 16
anything else
step 78
If the HLIU state is
Do
SysB
step 8
OffL
step 9
ManB
step 10
InSv
or
ISTb
step 11
SysB ManB OffL CBsy ISTb InSv
PM
1
10 12
0
6 49
HLIU 13 InSv
