1-366 Trouble locating and clearing procedures (continued)
297-8021-544 Standard 14.02 May 2001
Saving key, screen, status messages, command privileges and
option definitions
Application
Use this procedure to save the following:
•
current key
•
screen
•
Status messages
•
command privileges
•
option descriptions
Save these elements on diskette before you first load, reinstall or change the
TOPS MPX position software. To install or save these elements on a disk,
perform the procedure Installing key and option definitions. Do not continue
the save procedure.
Action
This procedure contains a summary flowchart and a list of steps. The flowchart
provides an overview of the procedure. Follow the list of steps to perform the
procedure.
Tools
This procedure requires one blank formatted disk.
Note: The TOPS MPX release MPX00200 contains a large number of new
terminal options. The DEFOPT utility defines the terminal options. The
DAS.OPT file stores the options. The DAS.OPT file from versions that
precede MPX00200 cannot propagate to MPX00200. The steps in this
procedure do not apply to the DAS.OPT file. References to the DAS.OPT
file remain.
After you install the terminal with the MPX00200 software, you must execute
the DEFOPT utility to generate a new DAS.OPT file. You can copy the
DAS.OPT file to a disk, as this procedure describes. Use the procedure Saving
key, screen, status messages, command privileges and option defintions to
copy the file to other positions.