3-12
Installing VCE components
Video Codec Enclosure (VCE) 323-3221-291 Rel 1.0 Standard
Procedure 3-4 (continued)
Installing cards in a DV-45 shelf
Step
Action
2
Attach the antistatic bracelet to ground or use an antistatic mat.
3
On the left side of the VCE, remove the locking bar from the DV-45 shelf as
shown in Figure 3-8.
4
Use Figure 3-9, Figure 3-10, or Figure 3-11 to determine the card position in
the DV-45 shelf.
5
Align the card with the slot and insert part way into the slot.
6
Open the latches on the card as shown in Figure 3-8 by squeezing lightly.
7
Insert the card the remainder of the way into the slot. Use the latches to fully
seat the card in the backplane connector.
8
Replace the locking bar when the last card has been installed.
Figure 3-8
DV-45 shelf showing locking bar
FW-3103.1
—continued—
Locking Bar
0
1
2
6
7
8
9
10
CAUTION
