Chapter 3 Installing the 8010co chassis
75
Installing and Maintaining the Passport 8000 Series Chassis
Connecting the ground cables to the rack grounding strip
To connect the chassis ground cables to the rack grounding strip:
1
Locate the shelf grounding point on the rack. This grounding point could be a
grounding strip at the back base, top, or side of the rack.
2
Attach the lug ends of the chassis ground cables to the rack grounding strip
(
).
Use a 7/16-inch hex wrench to fasten the hardware in the correct order.
Figure 39
Rack grounding strip example
Note:
shows an example of a rack grounding strip. Your rack
grounding strip may look different than the one shown in this example.
10433FA
1
2
3
4
1 = Hex head bolt
2 = Lock washer
3 = Ground crimp lug
4 = Rack grounding strip
Summary of Contents for Passport 8000 Series
