Chapter 2 Installing the 8010, 8006, and 8003 chassis
41
Installing and Maintaining the Passport 8000 Series Chassis
AC input electrical requirements (8010, 8006 and 8003 chassis)
Refer to the power specifications for the power supply in
specifications for the Passport 8000 Series Chassis,” on page 95
. For AC input
power specifications for each of the modules, see
Installing Passport 8600 Switch
Modules (312749-J)
.
DC input electrical requirements (8010 and 8006 chassis)
The installation site must meet the following electrical requirements for DC
power
. For additional electrical requirements, see
“Technical specifications for the Passport 8000 Series Chassis,” on page 95
Environmental requirements
The installation site must meet the following environmental requirements
(
).
Installing the chassis
When you are ready to install the chassis, you can do one of the following:
•
Position the chassis on a flat, sturdy, horizontal surface.
•
Mount the chassis in a standard 19-inch equipment rack.
Table 3
Electrical requirements for the DC models
DC power supply
Nominal Input
voltage
Input current
Input power
8004DC
–48 VDC
29 A
1392 W
8005DC
–48 VDC
42 A
1950 W
Table 4
Environmental requirements
Altitude
Humidity
Temperature
0-10,000 ft (0-3048 m)
5%-85%, noncondensing
32
°
F-104
°
F (0
°
C-40
°
C), stable
Summary of Contents for Passport 8000 Series
