Chapter 5 Setting up IP telephones
67
Survivable Remote Gateway 50 Configuration Guide
To configure DN records for redirected IP telephones
1
On the SRG50 Element Manager, navigate to the
All DNs
panel (
Configuration > Telephony
> Sets > All DNs
).
2
Select the
Line Access
tab.
3
Identify the row of the DN record to be configured.
4
Refer to the list of numbers and phone models recorded in the table in the server-specific
chapter (
“CS 1000 considerations” on page 33
and
“CS 2000 considerations” on page 53
).
5
From the pull-down menu, select the
Model
of telephone assigned to this DN.
6
To support outgoing caller ID over the VoIP trunk, the Private OLI field (
Priv. OLI
) must be
set to the DN.
7
To support outgoing number display over the PSTN, enter the public access number for the
telephone in the Public OLI field (
Pub. OLI
).
8
Leave the
Fwd All
field blank to disable the Call Forward All Calls feature when the
telephone is in local mode. In normal mode, the SRG50 can forward all calls to the main office
call server automatically (refer to
“Call forwarding options” on page 71
). In local mode, the
Call Forward All Calls feature is automatically discontinued and the SRG50 routes calls to the
SRG50 DNs.
Call Forward All Calls does not require
Allow redirect
to be enabled (
Allow redirect
is found on the
Capabilities
tab of the
Details for DN
subpanel when the
Capabilities and Preferences
tab is selected).
9
To assign specific PSTN lines to each telephone, add the line(s) (
Details for DN
details panel
>
Line Assignment
tab). You would do this if, for example, you want one user to field all
customer calls when the system is in local mode.
10
Ensure that the
Appearance Type
(
Details for DN
details panel >
Line Assignment
tab) is
set to
Ring only
.
11
Assign the VoIP and PSTN trunk line pools to the DN (
Details for DN
details panel >
Line
Pool Access
tab).
12
Assign a target line to the DN (
Details for DN
details panel >
Line Pool Access
tab). Refer to
“SRG50 terminology” on page 15
for a description of target lines.
Note:
For CS 1000: Refer to
“Recording numbers and models” on page 47
.
For CS 2000: Refer to
“Step 2: Record numbers and models (call
forwarding only)” on page 57
. (If the call forwarding feature is not
implemented, select
i2004/i2050
for all DNs.)
Note:
At this point, you may want to configure the received numbers.
Refer to
“Configuring received numbers” on page 69
and then return to
this procedure.
Summary of Contents for SRG50
