Part #
LED5500-X
, 12/24VDC Multi-Function, High Power LED Technology, Wide Angle, All-
Aluminum Housing, Waterproof Flashing Lamp with 5 user selectable patterns.
Box Content:
LED5500-X LED Multi-Function Lamp
Instruction
Installation:
Bench testing of the LED5500-X is recommended, see operation instructions below.
Locate an appropriate place for the unit installation and drill a minimum ¼” diameter hole in the
mounting surface, lining up the wire exit hole with the surface hole to be drilled.
Feed the power wires toward the power source (On/Off switch) thru a minimum 3A fuse and
connect the red wire to the positive terminal and the black wire to the negative terminal or chassis
for ground respectively.
If you plan on having two LED5500-X communicate and flash in a synchronized pattern, link the
two white wires exiting the rear of the LED5505s with a user supplied wire.
NOTE: Each LED5500-X requires an individual source for power and ground.
Use two #8 sheet metal screws to affix the unit in place.
.
Operation:
Power up the unit. The unit will display one of several pre-programmed patterns.
To change the pattern, touch the two green wires for one second and the pattern will change.
NOTE: For two units to communicate, first get both units on the identical flash pattern.
For a synchronized flash pattern, connect two units together with a user supplied wire connected to
both white wires out the back of the LED5500s.
Note:
Do not attempt to change a flash pattern while units are synchronized
Optional Accessories:
Universal L-shaped mounting bracket (part # LED5/3-BKT)
“U” mount “Bale” bracket (part # LED5K-BKT)
605 South Wheeling Road Wheeling, IL 60090-5706
Telephone: (847) 537-8888 Toll Free: (877) 246-6274 Fax: (847) 537-8895
Rev. 1.1 10/27/15
Summary of Contents for LED5500 Series
Page 2: ......
