background image

2

Swan 42 Tuning Guide

  Solutions for today’s sailors

Contents

Pg. 1  Part 1: Setting Up at Base 

Pg. 1  Part 2: Headstay 

 

Pg. 2  Part 3: Trim

 

Pg. 2  Part 4: Essential Items and Go-Fast Tips

 

Pg. 3  Part 5: On the Water Tuning Before Starting

 

Pg. 4  Tuning Guides 

 

Pg. 6  Worldwide Service 

The information in this 
guide applies to North 3DL 
and 3Di Swan 42 Class 
sails only. The North Sails 
Swan 42 Tuning System is 
designed and regatta proven 
at international events to 
produce terrific boat speed 
in all conditions.

Equipment Required

Vernier calipers 

 Lanacote

 Excel  spreadshee

 30 m steel metric tape 

 Loos Gauge RT-10

Loos Gauge RT-11

Swan 42

We hope you enjoy your Swan 42 Tuning Guide. North class 
representatives and personnel have invested a lot of time to make this 
guide as helpful as possible for you. Tuning and trim advice offered 
here have been proven over time with top results in the class.

North has become the world leader in sailmaking through an ongoing 
commitment to making sails faster, lighter and longer lasting. We are 
equally committed to working as a team with our customers. 

As always, if you have any questions or comments we would love to 
hear from you. Please contact your CSD class representative.

Sincerely,

Ken Read

President North Sails Group

Summary of Contents for Swan 42










Reviews: