northsolar.com.au 0435 016 869
N rth
Solar
“Solar Hot Water Solutions”
northsolar.com.au 0435 016 869
N rth
Solar
“Solar Hot Water Solutions”
Diagram for installation on a flat roof
General information about solar hot water systems
Once the unit is installed on the roof, the internal tank temperature
can reach over 90oC even when external ambient temperature is below
-10oC.
It is important to use appropriate piping to cope with high temperature
and pressure (refer to your Registered plumber for local regulations).
Copper piping is ideal due to its strength, non-odour, heat resistance,
and not being prone to cracking in freezing temperatures.
Checking your heater
After your unit is installed and plumbed in, make sure it is not shaded by
trees or other objects.
The tubes should face North to receive the most sunlight during the day.
It is IMPORTANT that there are no leaks in any pipes, joins, connectors
