Assembly
10
Step One: Attach the tongue to the cart base
Fasten with (2) 5/16 x ¾” carriage bolts and (2) 5/16 flange nuts. Tighten to 20 ft-lbs.
Step Two: Attach the hitch mount to the tongue
Fasten with (2) 5/16 x ¾” carriage bolts and (2) 5/16 flange nuts. Tighten to 20 ft-lbs.
Step Three: Attach the cart base to the sprayer
Note: To protect the pump from damage, place two wood planks or spacers under the sprayer to
keep the pump from resting on the ground.
Using (4) 5/16 flat washers, loosely thread (4) 5/16 x ¾” flange bolts into the inserts in the
bottom of the sprayer. Center the sprayer on the cart base and tighten to 5 ft-lbs.
Hitch
5/16 Flange nut
Tongue
Cart base
5/16 x ¾” Carriage bolt
5/16 Flange nut
Cart base
Wood planks
or spacers
(Not included)
Sprayer
5/16 x ¾”
Flange bolt
5/16 Flat
washer