Assembly (continued)
12
Step Seven: Attach gun clips to tank
Fasten one gun clip and one large gun clip to the sprayer tank with (2) #10 x 1/4” screws.
Step Eight: Attach drain cap to tank
Press the rubber washer into the drain cap, then thread the drain cap onto the tank.
Step Nine: Attach hose guide to tank
1.
Route gun hose around sprayer and through hose guide.
2.
Attach hose guide to tank with (1) 5/16 x 1/2” flange bolt.
Gun hose
5/16 x 1/2” Bolt
Hose guide
#10 x ¼” screw
Small gun clip
Rubber washer
Drain cap
Large gun clip