background image

 

17 

Limited Warranty 

 

Dear Valued Customer: 

 
The NorthStar Product you just purchased is built with the finest material and craftsmanship.  Use this product properly and enjoy the benefits 
from its high performance.  By purchasing a NorthStar product, you show a desire for quality and durability.  Like all mechanical equipment this 

unit requires a due amount of care.  Treat this unit like the high quality piece of machinery it is.  Neglect and improper handling may impair its 
performance.  Please thoroughly read the instructions and understand the operation before using your product.  Always contact  NorthStar 
Product Support at 1-800-270-0810 prior to having any service or warranty work performed, as some services performed by parties other than 

NorthStar approved service centers may void this warranty.  This warranty is in lieu of any other warranty expressed or implied and NorthStar 
assumes no other responsibility or liability outside that expressed within this warranty. 

Limited Warranty 

 

NorthStar shall warranty any

 

piece of equipment manufactured, or parts of equipment manufactured, to be free from defects in material or 

workmanship for a period of: 

 

NorthStar Warranty 

Item # 

Consumer Warranty Period 

Commercial Warranty Period 

51481 

1 year from date of purchase by user 

1 year from date of purchase by user 

 

 

“Consumer  use”  means  personal  residential  household  use  by  a  consumer.  “Commercial  use”  means  all  other  uses,  including  use  for 
commercial, income producing or rental purposes or when purchased by a business. 
 

This warranty applies to the original purchaser of the equipment (verification of purchase, in the form of a receipt, is the  responsibility of the 
buyer), is non-transferable, and covers parts and labor.  Parts will be replaced or repaired at no charge, except when the equipment has failed 

due to lack of proper maintenance.  If a part is no longer available, the part may be replaced with a similar part of equal function.  Any misuse, 
abuse, alteration or improper installation or operations will void warranty.  Determining whether a part is to be replaced or repaired is the sole 
decision of  NorthStar.   NorthStar will not provide for replacement of complete products due to defective parts.   Any costs incurred due to 

replacement  or  repair  of  items  outside  of  a  NorthStar  approved  facility  is  the  responsibility  of  the  buyer  and  not  covered  under  warranty. 
Transportation costs to and from service center is the responsibility of the customer.   
 
In addition to the normal warranty, NorthStar shall warrant any normal wear item from defects in material or workmanship for a period of 90 
days from the date of purchase by user.  Normal wear items include, but are not limited to, belts and filter elements. 

 
This  warranty  specifically  excludes  the  following;  failure  of  parts  due  to  damage  caused  by  accident,  fire,  flood,  windstorm,  acts  of  God, 
applications  not  approved  by  NorthStar  in  writing,  corrosion  caused  by  chemicals,  use  of  replacement  parts  which  do  not  conform  to 

manufacturer’s specifications, damage related to rodent and/or insect infestation and damage caused by vandalism.  Additional exclusions: 
loss of running time, inconvenience, loss of income, or loss of use, including any implied warranty of merchantability of fitness for a specific 

use.  Also, Power Equipment needs periodic parts and service to perform well, and this warranty does not cover instances when normal use 
has exhausted the life of a component or the motor.  

 

 

This warranty does not cover any personal injury or damage to surrounding property caused by failure of any part. Repair or replacement of 
parts does not extend the warranty period. 
 

 
Please fill in the following information and have it on hand when you call in on a warranty claim. 
 
Customer Number: ______________________________________________________________ 
 

Date of Purchase: _______________________________________________________________ 
 
NorthStar Serial Number: _________________________________________________________ 

 
Item Number: __________________________________________________________________ 

 

 
 

Summary of Contents for M51481A



















Reviews: