background image

Page 34 of 36 

 

Limited Warranty 

Dear Valued Customer:  

The NorthStar® Product you just purchased is built with the finest material and craftsmanship. Use this product properly and 
enjoy the benefits from its high performance. By purchasing a NorthStar® product, you show a desire for quality and durability. 
Like all mechanical equipment, this unit requires a due amount of care. Treat this unit like the high-quality piece of machinery it 
is. Neglect and improper handling may impair its performance. Please thoroughly read the instructions and understand the 
operation before using your product. Always contact NorthStar® Product Support at 1-888-895-4549 prior to having any service 
or warranty work performed, as some services performed by parties other than NorthStar® approved service centers may void 
this warranty. This warranty is in lieu of any other warranty expressed or implied and NorthStar® assumes no other responsibility 
or liability outside that expressed within this warranty.  

Limited Warranty 

NorthStar® shall warranty any piece of equipment manufactured, or parts of equipment manufactured, to be free from defects in 
material or workmanship for a period of: 

 

NorthStar

®

 Warranty 

Item # 

Consumer Warranty Period 

Commercial Warranty Period 

75859 

4 years from date of purchase by user  2 years from date of purchase by user 

 

“Consumer use” means personal residential household use by a consumer. “Commercial use” means all other uses, including 

use for commercial, income producing, or rental purposes or when purchased by a business.  

This warranty applies to the original purchaser of the equipment (verification of purchase, in the form of a receipt, is the 
responsibility of the buyer), is non-transferable, and covers parts and labor. Parts will be replaced or repaired at no charge, 
except when the equipment has failed due to lack of proper maintenance. If a part is no longer available, the part may be 
replaced with a similar part of equal function. Any misuse, abuse, alteration, or improper installation or operations will void 
warranty. Determining whether a part is to be replaced or repaired is the sole decision of NorthStar®. NorthStar® will not provide 
for replacement of complete products due to defective parts. Any costs incurred due to replacement or repair of items outside of 
a NorthStar® approved facility is the responsibility of the buyer and not covered under warranty. Transportation costs to and from 
the service center is the responsibility of the customer. For technical repairs, a service center may be dispatched to conduct the 
repair on-site. 

In addition to the normal warranty, NorthStar® shall warrant any normal wear item from defects in material or workmanship for a 
period of 90 days from the date of purchase by user. Normal wear items include, but are not limited to,

 

belts, sheaves, flywheels, 

check valves, pressure switches, air unloaders, throttle controls, electric motors, brushes, regulators, O-rings, pressure gauges, 
tubing, piping, fittings, fasteners, wheels, quick couplers, gaskets, seals, air filter housings, piston rings, connecting rods, and 
piston seals.  

This warranty specifically excludes the following items: routine maintenance items such as oil, lubricants, and air filters, as well 
as changing oil, air filters, belt tensioning, etc., 

fall under the owner’s responsibility. Additional exclusions 

include: freight 

damage, failures resulting from neglect, accident, or abuse, induction motors when operated from a generator, oil leaks, air 
leaks, oil consumption, leaky fittings, hoses, petcocks, bleeder tubes, and transfer tubes. Additional exclusions include: loss of 
running time, inconvenience, loss of income, or loss of use. Additional exclusions include: failure of parts due to damage caused 
by accident, fire, flood, windstorm, or acts of God, Applications not approved by NorthStar® in writing, corrosion caused by 

Summary of Contents for NSLA1683066





































Reviews: