Page 6 of 36
Important Safety Information
⚠
WARNING
•
Read and understand all instructions. Failure to follow all instructions may result in serious injury or
property damage.
•
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.
•
Do not allow persons to operate or assemble the product until they have read this manual and have
developed a thorough understanding of how it works.
•
Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.
•
Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. This
product will be safer and do a better job at the capacity for which it was intended. DO NOT use this
equipment for a purpose for which it was not intended.
•
Industrial or commercial applications must follow OSHA requirements.
⚠
WARNING
PROP 65
•
This product can expose you to chemicals including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm. For more information, go to
www.p65warnings.ca.gov.
⚠
WARNING
WORK AREA SAFETY
•
Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.
Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas may
put you dangerously close to cutting tools and rotating parts.
•
Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence of
flammable liquids, gases, or dust. The product can create sparks, which may ignite the flammable
liquids, gases, or dust.
•
Do not allow the product to come into contact with an electrical source. The tool is not insulated and
contact will cause electrical shock.
•
Keep children and bystanders away from the work area while operating the tool. Do not allow children
