7
10.1 TURN ON FRYER.
Switch on general rocket switch in position
«I»
At the display, you will notice one blinking dash.
Press the red on button until you hear beep and
turn on the display with dashes. The indicate
lamp of heat starts blinking FMC cycle start.
Once reach the temperature it stays on.
(Can cancel FMC cycle by pressing No5 button
for 3-4 sec)
ATTENTION BEFORE TURN ON THE FRYER
ENTER THE CORRECT LITER OF OIL UNTIL
THE MARK WHICH ARE IN THE TANK
10.2 INPUT TEMPERATURE
After turn on step, press
«M»
button until the
temperature led will turn on. Press narrow button
(Up/Down)
to
enter
the
desire
cooking
temperature.
10.3 TIME INPUT
After temperature step, press
«M»
button until
the time led will turn on. Press narrow button
(Up/Down) to enter the time of cooking period
10.4 START COOKING
After you have entered the desire time &
temperature.
Press the
»
button.
(If the oil has reached the desire temperature, the
display starts blinking and sound signal starts.
Push
»
to start cooking cycle.
If the oil has not reach the temperature the
indicate heating lamp will blink.
When is going to reach the temperature will start
sound signal.
When the display is blinking then you can push
the
»
to start the cooking cycle.)
The time now start count down. When the time is
finish you will hear beeper.
! ATTENTION !
WHILE YOU ARE COOKING OR THE
OIL IS HOT BE VERY CAREFULLY
CAN CAUSE BURNING
.
10.5 STAND-BY COOKING CYCLE
While cooking cycle is running you can pause
time by pressing the
»
button once.
The display start blinking and the time is in pause
situation.
By pressing
»
button once start the cooking
time from the time which has been interrupted.
10.6 CANCEL COOKING CYCLE
During cooking cycle you can cancel the function
by press the
»
button for about 5sec.
10.7 CHECKING COOKING CYCLE
While the appliance is in cooking cycle press the
arrow up
button. The time stop and the basket
rise up to check the products by pressing the
arrow down
start the time and the basket getting
down.
10.8 CLOSE FRYER
Once you have finish close the appliance from
the
on/off
button by pressing until is closed.
Close General rocket switch in position
«O»
10.9 STAND-BY function
If the machine stay out of use aprox. 60min start
stand-by function automatic. (It is possible to
cancel this function or to change the time)
10.10 SHAKE FUNCTION
Shake function remind you with sound and
blinking led to shake the basket while the
appliance is under cooking function.
(This function can be cancel it or change the
time)
10.11 FMC FUNCTION
FMC function is use it to rise up the temperature of
the oil or fat very slow for not burn the oil or the
fat. It needs 10-12min to get 90C.
(This Function can be cancel it)
Summary of Contents for FL15
Page 10: ...10 ...
