OM843NW3 5/21
7
Safety Rules (Continued)
Avoid creating dust. Never use compressed air for
cleaning. Avoid brushing or grinding materials
containing asbestos. When servicing, wear an
approved respirator. A special vacuum cleaner is
recommended to clean asbestos. If this vacuum is not
available, apply a mist of oil or water on the material
containing asbestos. Keep all bystanders away from
any area where asbestos dust may be generated.
Use Proper Lifting Equipment and Techniques
!
WARNING
Lifting heavy components incorrectly
can cause severe injury or damage
to machinery. Avoid unbalanced
loads. Do not use lifting eyes. Lift
the generator set using lifting bars inserted through
the lifting holes on the skid. Follow all recommended
removal and installation procedures in this and
associated Northern Lights manuals.
Use Proper Tools
!
CAUTION
Makeshift tools and procedures
can create safety hazards.
Always use appropriate tools for the job.
Use power tools only to loosen threaded parts and
fasteners. For loosening and tightening hardware,
always use the correct sized tools.
Do not use US measurement tools on metric
fasteners, or vice versa. Use only service parts that
meet Northern Lights specifications.
Dispose of Waste Properly
!
CAUTION
Disposing of waste improperly can threaten the
environment and lead to unsafe working conditions.
Potentially harmful waste used in Northern Lights
equipment can include oil, fuel, coolant, filters and
batteries.
Use leakproof containers to drain fluid. Do not
use food or beverage containers that may mislead
someone into drinking from them.
Do not pour waste onto the ground, down a drain or
into any water source.
Do Not Open High-Pressure Fuel System
!
DANGER
Many Northern Lights engines use high-
pressure fuel injection. High-pressure fluid
remaining in fuel lines can cause serious
injury. Do not disconnect or attempt
any repair of fuel lines, sensors, or other
components between the high-pressure fuel pump
and nozzles on engines with high pressure fuel
systems.
ONLY AUTHORIZED TECHNICIANS CAN
PERFORM REPAIRS ON AN HIGH PRESSURE
FUEL INJECTION SYSTEMS.
Avoid Hot Exhaust
!
WARNING
Avoid exposure to and physical
contact with hot exhaust gases. Exhaust parts
and streams can reach high temperatures during
operation, leading to burns or other serious injury.
Cleaning exhaust filters can also lead to exposure to
hot exhaust gas and the injury risk associated with
it. Avoid exposure to and physical contact with hot
exhaust gases when cleaning exhaust filters.
During auto or manual/stationary exhaust filter
cleaning operations, the engine will run at
elevated temperatures for an extended period of
time. Exhaust parts and streams can reach high
temperatures during operation, leading to burns or
other serious injury.
Avoid Harmful Asbestos Dust
!
WARNING
Inhaling asbestos fibers may
cause lung cancer. Avoid
breathing any dust that may
be generated when handling
components containing asbestos
fibers, including some gaskets.
The asbestos used in these components is usually
found in a resin or otherwise sealed. Normal
handling of these components is not dangerous,
as long as airborne dust containing asbestos is not
generated.
Updated 4-12-17
Summary of Contents for Lugger M843NW3
Page 55: ......
