4
3.
Check for proper drum rotation. Pull and turn the clutch knob to the “off”
position (Free-spooling). Pull out some strip from the drum, and then turn the
clutch knob to the “In” position to engage the gears. Press the cable out button
on the power switch. If the drum is turning and releasing more cable then your
connections are accurate. If the drum is turning and collecting more cable then
reverse the leads on the motor. Repeat and check rotation.
SAFETY PRECAUTIONS
WARNING
WARNING
– DO NOT EXCEED RATED CAPACITY.
WARNING
– Intermittent use only.
WARNING - Do not use winch in lifting or moving or persons.
WARNING-Disconnect the remote control and battery leads
when not in use.
WARNING-
Do not exceed maximum pull rating. Avoid “shock
loads” by using the control switch intermittently to take up the
slack in the wire rope. “Shock loads” can far exceed the rate
capacity for the strip and drum.
WARNING- Do not exceeds maximum line pull ratings shown
on the tables.
Do not use as a hoist. Do not use for overhead lifting.
Failure to heed these warnings may result in personal injury
and/or property damage.
CAUTION
- If the motor stalls do not maintain power to the
winch. Electric winches are designed and made of intermittent
use and should not be used in constant duty applications.
CAUTION
- Never release the free-spool clutch when there is a load on
the winch.
