Northern 332101, Owner'S Manual

For technical questions and replacement parts, please call 1-800-222-5381.
Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO.,

INC. Product! For future reference, please complete the owner's record below:

Model: _______________     Purchase Date: _______________

Save the receipt, warranty and these instructions. It is important that you read

the entire manual to become familiar with this product before you begin using it.
This machine is designed for certain applications only. Northern Tool + Equipment

strongly recommends this machine is not modified and/or used for any 

application other than that for which it was designed. If you have any questions

relative to a particular application, DO NOT use the machine until you have

first contacted Northern Tool + Equipment to determine if it can or should be

performed on the product.

INTENDED USE

The Compound Miter saw is used to make a quick, accurate crosscuts in wood for framing

operations and cutting molding. The saw's miter index allows the angle of the blade to be

changed relative to the fence. The compound feature allows the angle of the cutting blade to
be changed relative to the horizontal plane. This allows the saw to be used for bevel cutting.

TECHNICAL SPECIFICATIONS

Description

Specifications

Motor:

1.5Hp, 120V, 60Hz, 10 Amps

No-load speed:

4800 RPM 

Blade Diameter:

8 

1

/

4

"

Bevels:

0 - 45º left only

Cutting Capacitiesl:

0º x 90°: 2-

3

/

8

" H x 4-

3

/

4

" W

45º x 90°: 2-

3

/

8

" H x 3-

3

/

16

" W

0º x 45°: 1-

3

/

8

" H x 4-

3

/

4

" W

45º x 45°: 1-

3

/

8

" H x 3-

3

/

16

" W

ACCESSORIES

1 x 8-

1

/

4

" Blade

1 set Carbon Brushes

1 x Dust Bag

3 x Extension Wings

1 x Spanner

1 x Clamp

1 x Allen Key

1