User Manual of Network Camera
115
If you select
Continuous
, the video will be recorded automatically according
to the time of the schedule.
Record Triggered by Motion Detection
If you select
Motion Detection
, the video will be recorded when the motion
is detected.
Besides configuring the recording schedule, you have to set the motion
detection area and check the checkbox of
Trigger Channel
in the
Linkage
Method
of Motion Detection Settings interface. For detailed information,
please refer to the
Step 1
Set the Motion Detection Area
in the Section
6.6.1.
Record Triggered by Alarm
If you select
Alarm
, the video will be recorded when the alarm is triggered
via the external alarm input channels.
Besides configuring the recording schedule, you have to set the
Alarm
Type
and check the checkbox of
Trigger Channel
in the
Linkage Method
of
Alarm Input Settings
interface. For detailed information, please refer to
Section 6.6.3
.
Record Triggered by Motion & Alarm
If you select
Motion & Alarm
, the video will be recorded when the motion
and
alarm are triggered at the same time.
Besides configuring the recording schedule, you have to configure the
settings on the
Motion Detection
and
Alarm Input Settings
interfaces.
Please refer to
Section 6.6.1
and
Section 6.6.3
for detailed information
.
Record Triggered by Motion | Alarm
If you select
Motion | Alarm
, the video will be recorded when the external
alarm is triggered or the motion is detected.
Besides configuring the recording schedule, you have to configure the
settings on the
Motion Detection
and
Alarm Input Settings
interfaces.
Please refer to
Section 6.6.1
and
Section 6.6.3
for detailed information
.
Summary of Contents for NTH-IP3B
Page 1: ......
Page 139: ...User Manual of Network Camera 139 Figure A 1 2 Modify Network Parameters ...
Page 142: ......
