User Manual of Network Camera
33
Figure 4-11
Wi-Fi Settings – WPS PIN Mode
2.
Choose
Use route PIN code
.
If the PIN code is generated from the router side, you should enter the PIN code you
get from the router side in the
Router PIN code
field.
3.
Click
Connect
.
Or
You can generate the PIN code on the camera side. And the expired time for the PIN
code is 120 seconds.
1.
Click
Generate
.
2.
Enter the code to the router, in the example, enter 48167581 to the router.
4.3
IP
Property Settings for Wireless Network
Connection
The default IP address of wireless network interface controller is 192.168.1.64. When
you connect the wireless network you can change the default IP.
Steps:
Summary of Contents for NTH-IP3B
Page 1: ......
Page 139: ...User Manual of Network Camera 139 Figure A 1 2 Modify Network Parameters ...
Page 142: ......