User Manual of Network Camera
47
ranges from 1024 to 65535.
HTTPS Port:
The default port number is 443, and it can be changed to any port
No. which is not occupied.
Server Port:
The default server port number is 8000, and it can be changed to
any port No. ranges from 2000 to 65535.
3.
Click
Save
to save the settings.
Note
:
A reboot is required for the settings to take effect.
6.3.3
Configuring PPPoE Settings
Steps:
1.
Enter the PPPoE Settings interface:
Configuration >Advanced Configuration >
Network > PPPoE
Figure 6-8
PPPoE Settings
2.
Check the
Enable
PPPoE
checkbox to enable this feature.
3.
Enter
User Name
,
Password
, and
Confirm
password
for PPPoE access.
Note:
The User Name and Password should be assigned by your ISP.
For your privacy and to better protect your system against security risks, we
strongly recommend the use of strong passwords for all functions and network
devices. The password should be something of your own choosing (using a
minimum of 8 characters, including at least three of the following categories:
upper case letters, lower case letters, numbers and special characters) in order to
increase the security of your product.
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
Summary of Contents for NTH-IP3B
Page 1: ......
Page 139: ...User Manual of Network Camera 139 Figure A 1 2 Modify Network Parameters ...
Page 142: ......
