User Manual of Network Camera
98
4.
Select the linkage methods for defocus, including Notify Surveillance Center,
Send Email and Trigger Alarm Output.
5.
Click
Save
to save the settings.
Figure 6-59
Configuring Defocus Detection
6.6.9
Configuring Scene Change Detection
Purpose:
Scene change detection function detects the change of surveillance environment
affected by the external factors; such as the intentional rotation of the camera, and
some certain actions can be taken when the alarm is triggered.
Note:
Scene change detection function varies according to different camera models.
Steps:
1.
Enter the Scene Change Detection settings interface:
Configuration> Advanced Configuration> Smart Event> Scene Change
Detection
2.
Check the checkbox of
Enable Scene Change Detection
to enable the function.
3.
Click-and-drag the slider to set the detection sensitivity. The sensitivity value
ranges from 1 to 100, and the higher the value is, the more easily the change of
scene can trigger the alarm.
4.
Click the
Edit
button to set the arming schedule.
5.
Select the linkage methods for scene change, including Notify Surveillance
Center, Send Email, Upload to FTP, Trigger Channel and Trigger Alarm Output.
6.
Click
Save
to save the settings.
Summary of Contents for NTH-IP3B
Page 1: ......
Page 139: ...User Manual of Network Camera 139 Figure A 1 2 Modify Network Parameters ...
Page 142: ......