background image

NLE5WZ_LS56 

www.northlineexpress.com 

1-866-667-8454

 

SAFETY WARNINGS & CAUTIONS 

SAFETY WARNINGS & INSTRUCTIONS 

SYMBOL AFFIXED TO THE 

MACHINE 

UNDERSTAND YOUR LOG SPLITTER

Read and understand the owner

s manual and labels affixed to 

the log splitter. Learn its application and limitations as well as the 
specific potential hazards particular to it. 

DRUGS, ALCOHOL AND MEDICATION

Do not operate the log splitter while under the influence of drugs,
alcohol, or any medication that could affect your ability to use  it
properly.

AVOID DANGEROUS CONDITIONS

Put the log splitter on a 23 - 29" high, stable, flat, and level work
bench where there is plenty of room for handling, and help the
operator stay alert. Bolt the log splitter to the work surface if it
tends to slip, walk, or slide.
Keep your work area clean and well lighted. Cluttered areas
invite injuries.
Do not use the log splitter in wet or damp areas or expose it to
rain.
Do not use it in areas where fumes from paint, solvents or
flammable liquids pose a potential hazard.

INSPECT YOUR LOG SPLITTER

Check your log splitter before turning it on. Keep guards in place
and in working order. Form a habit of checking to see that the
keys and adjusting wrenches are removed from tool area before
turning it on. Replace damaged, missing or failed parts before
using it.

DRESS PROPERLY

Do not wear loose clothing, gloves, neckties or jewelry (rings,
wrist watches). They can be caught in moving parts.
Protective electrically nonconductive gloves and non-skid
footwear are recommended when working. Wear protective hair
covering to contain long hair, preventing it from get caught in
machinery.

PROTECT YOUR EYES AND FACE

Any log splitter may throw foreign objects into the eyes. This can
cause  permanent  eye  damage.  Always  wear  safety  goggles.
Everyday  eyeglasses  have  only  impact  resistant  lenses.  They
are not safety glasses.
Do  not  put the log  splitter on  the ground  for operations. This  is
awkward  operating  position  that  the  operator  has  to  bring  his
face close to the machine, and thus risks being struck by wood

Summary of Contents for HY4T-370
















Reviews: