North
Q
Power & Gas Reader
Revision: 2.2
11
If calibration has failed you must inform the user that he didn't place the sensor head
properly on the meter, he didn't plug the cable properly in the Power Reader or there is a very
low consumption on the meter and the meter disk spins very slow.
- set the pulse count register with the proper value (as described in
COMMAND_CLASS_CONFIG)
- show the user the real-time consumption using command class meter
- as soon as the user finished checking the real-time consumption send the Power Reader to
sleep
VII. Support
Any support requests have to be submitted by email to cvs@northq.com (Christian) or
pfl@northq.com (Florin).
