North
Q
Power & Gas Reader
Revision: 2.2
3
Contents
I. Device Information
The Power Reader is a metering device capable of counting pulses from any electricity
or gas meters. The device stores timestamped consumption in its internal memory every 15
minutes.
Note:
The Power Reader for electricity metering has different firmware than the Power Reader
for gas metering. Please make sure you have the appropriate firmware on your device before
you start integrating / installing it. The proper way of distinguishing between the two firmware
versions is by using the MANUFACTURER SPECIFIC command class.
Device presentation:
- NIF:
Generic device class:
GENERIC TYPE METER
Specific device class:
SPECIFIC TYPE SIMPLE METER
- SUPPORTED COMMAND CLASSES:
COMMAND_CLASS_BASIC
COMMAND_CLASS_BATTERY
COMMAND_CLASS_WAKE_UP
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2
COMMAND_CLASS_TIME_PARAMETERS
COMMAND_CLASS_METER_V2
COMMAND_CLASS_CRC_16_ENCAP
COMMAND_CLASS_CONFIGURATION
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
COMMAND_CLASS_VERSION
COMMAND_CLASS_METER_TBL_MONITOR
