IMPORTANT SAFETY INSTRUCTIONS
2
THERE’S ONLY ONE™ ELECTRIC MIRROR® | E
sales@electricmirror.com
|
T
+1 425 776-4946
|
F
+1 425-491-8200
|
W
www.electricmirror.com
Must be installed by a qualified electrician
Read these instructions. Keep these instructions for future use.
Install in accordance with manufacturer’s instructions.
This product is suitable for wet locations. Clean only with water, mild soap and soft cloth. Do not clean with harsh
detergents.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(Including amplifiers) that produce heat.
Do not defeat the safety purpose of the grounding-type plug.
A grounding-type plug has two blades and a third grounding prong.
The third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
where they exit from the appliance.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as: power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
Terminals that are marked with a lightning flash are hazardous. Any external wiring connections to these terminals
requires installation by an electrician.
CAUTION
READ ALL INSTRUCTIONS PRIOR TO INSTALLATION
WARNING:
TO PREVENT INJURY, THE BATH/SPA TV MUST BE INSTALLED IN ACCORDANCE WITH THE MANUFACTURER’S
INSTRUCTIONS
CAUTION:
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. BEWARE
OF STATIC SENSITIVE PARTS.
UNPACKING YOUR BATH/SPA TV
Verify Contents
Prior to installation unpack items and verify contents. The Bath/Spa TV comes with the following components:
1. In-Wall box with right angled plastic L-channel pieces
2. A NRTL Approved Power Supply, 15 Watts AC/DC, 90-264 Volts input and 12 Volts output
3. Power cord
4. HDMI cable
5. RF Cable
6. LCD-TV with glass face and stainless steel bezel
7. Remote Control
