Chapter 6 - Understanding the Waypoints Function
957 Operator’s Manual, Rev. B
Page 71
3. Press the
ADD
key to display the
NEW
WAYPOINT
screen.
4. Enter a waypoint name and optional description.
5. Choose a symbol for the waypoint by pressing the
SYMBOL
menu key to find the symbol you want.
6. Enter the waypoint’s coordinates. If you want to switch
among displaying coordinates as lat/lon, as loran TDs, or
as distance and bearing coordinates, press the
COORD
TYPE
menu key:
>
For loran TDs, enter any legitimate pair of TDs and the
GRI for the pair. After entering the GRI, check the name
of the GRI that’s automatically displayed to ensure it’s
correct.
>
For distance and bearing from your present position,
leave the
FROM
point set to
-HERE-,
and enter the
bearing and the distance to the desired waypoint.
>
For distance and bearing from any other stored
waypoint, press the
FROM
menu key to display a list of
waypoints. Press the
CURSOR PAD
to select the desired
waypoint and press the
ENTER
key. Enter the bearing
and the distance from the designated waypoint to the
new waypoint. If you change your mind and want to
return to specifying distance and bearing from your
present
position instead of from another
waypoint
, press
the
FROM HERE
menu key on the waypoint list screen
Summary of Contents for 957
