Chapter 8 - Understanding Waypoint/Route Navigation
958 Operator’s Manual, Rev. A
Page 117
From here, you can perform the following functions:
•
select a starting waypoint or leg
•
reverse the route
•
start following the route
Selecting the
starting point
Initially, the nearest waypoint is selected as the starting point
of the route. You can press the
CURSOR PAD
select a different
waypoint or route leg. To see a small or large area of the route,
press the
IN
and
OUT
keys, respectively. If you decide not to
follow this route, press the
RETURN
menu key to go back to
the
ROUTES
screen.
Reversing the route
To follow the route in the opposite way of the route’s small
directional arrows, press the
REVERSE
menu key. The
direction of the route and the arrows will change from end to
end.
Starting the route
To go directly to any selected waypoint in the route (the
nearest one is the default), press the
GO TO WAYPT
menu key,
then press the
ENTER
key. The 958 calculates a track line
from your present position to the selected route waypoint.
If you want to start navigating along a route leg, rather than
directly to a waypoint, select the leg by moving the cursor
Summary of Contents for 958
