NorthStar 961 Reference Manual Download

Page: 174 / 404

Chapter 7 - Creating Avoidance Points

Page 7-14

961/962 Operations and Reference Manual, Rev. A

4. Press the

DONE

key to store the avoidance point to the

avoidance point database (or press the

CANCEL

key to

cancel).

The

CHART

screen appears, showing the new radius of

the avoidance point and its position data in the

CURSOR

INFO BAR

On the

CHART

screen, you can edit an avoidance point by

changing its radius.

1. At the

CHART

screen, press the

CURSOR PAD

and if

necessary, the

LEFT ARROW

and

RIGHT ARROW

keys, to

select an avoidance point’s

radius

, then press the

CURSOR

menu key.

2. Press the

EDIT

key.

The

CHART

screen appears, showing the selected

avoidance point radius.

3. Press the

CURSOR PAD

to move the cursor and the

radius to the desired location.

4. Press the

DONE

key to store the new avoidance point

radius to the avoidance point database (or press the

CANCEL

key to cancel).

The

CHART

screen appears, showing the avoidance

point’s new radius and its position data in the

CURSOR

INFO BAR

Erasing an avoidance point

At the

AVOIDANCE POINTS

screen, you can permanently

erase an avoidance point from the database:

1. At the

AVOIDANCE POINTS

screen, press the

CURSOR

PAD

up or down to select the desired avoidance point.

2. Press the

EDIT

key.

3. Press the

ERASE AVOID

key.

4. After you press the

ERASE AVOID

key, you’re asked to

confirm this action before you proceed by pressing the

YES

key (to cancel the erasure, press the

key).

Summary of Contents for 961





















































































































































































































































































































































































































Search results

Summary of Contents for 961

Reviews:

Related manuals for 961

Brands by name

Popular brands

NorthStar 961, Reference Manual

Search results

Summary of Contents for 961

Reviews:

Related manuals for 961

Brands by name

Popular brands