NorthStar 961 Reference Manual Download

Page: 197 / 404

Chapter 8 - Creating Routes

961/962 Operations and Reference Manual, Rev. A

Page 8-21

then press the

INSERT

key to insert the selected waypoint

in this route leg.

3. When finished, press the

DONE

key to store the changes

to the database and return to the

ROUTES

screen.

Deleting route waypoints

To permanently delete individual waypoints from a route (but
not from the database of waypoints):

1. At the

EDIT ROUTE

screen, press either the

MOVE UP

MOVE DOWN

keys to highlight the route waypoint you

want to delete, then press the

DELETE

key.

2. Repeat step #1 for each waypoint that you want to delete.
3. When finished, press the

DONE

key to store the changes

to the database and return to the

ROUTES

screen.

Editing a route at

the chart screen

At the

CHART

screen, you can change a route in the following

ways:

•

graphically move waypoints anywhere in a route

•

graphically add waypoints to a route leg

•

graphically add waypoints to the end of a route

•

delete waypoints from the route

Graphically moving a route’s waypoints

1. On the

ROUTES

screen, press the

CURSOR PAD

up or

down to select the desired route.

2. To display the route on the

CHART

screen, press the

CHART

key, then press the

CHART

key.

3. At the

CHART

screen, press the

CURSOR PAD

to select

the route waypoint you want to move.

The name of the selected route must appear in the

CURSOR INFO BAR

; to highlight the route’s waypoint,

you may have to press the

LEFT ARROW

and

RIGHT

ARROW

keys. Pressing these keys lets you select a

named route waypoint, if any, or an unnamed route

waypoint, called

POINT X

Summary of Contents for 961





















































































































































































































































































































































































































Search results

Summary of Contents for 961

Reviews:

Related manuals for 961

Brands by name

Popular brands

NorthStar 961, Reference Manual

Search results

Summary of Contents for 961

Reviews:

Related manuals for 961

Brands by name

Popular brands