NorthStar 961 Reference Manual Download

Page: 248 / 404

Chapter 11 - Using the Trip Function

Page 11-14

961/962 Operations and Reference Manual, Rev. A

To permanently erase all the trip points

after

the selected one,

but not the selected one (with this option, you can only erase
points after the

active

waypoint):

1. At the

TRIP

screen, select the point at which all other

points after it will be erased, then press the

ERASURES

key.

2. Press the

ERASE AFTER

key.

All the selected trip points are erased, and the

TRIP

screen appears.

Erasing a single

waypoint

To erase a single trip point:

1. At the

TRIP

screen, select the desired point.

2. Press the

ERASURES

key.

3. Press the

ERASE CURRENT

key.

The trip point is erased, and the

TRIP

screen appears.

Restarting the track at the trip screen

To restart the track from your present position to the active
waypoint (this changes your current track, but not the trip):

1. At the

TRIP

screen, select the active waypoint.

2. Press the

GO TO SELECTION

key.

The

RESTART HERE

dialog box appears.

Summary of Contents for 961





















































































































































































































































































































































































































Search results

Summary of Contents for 961

Reviews:

Related manuals for 961

Brands by name

Popular brands

NorthStar 961, Reference Manual

Search results

Summary of Contents for 961

Reviews:

Related manuals for 961

Brands by name

Popular brands