NorthStar 961 Reference Manual Download

Page: 260 / 404

Chapter 12 - Alarms, TideTrack, Currents, and Echo Sounding

Page 12-10

961/962 Operations and Reference Manual, Rev. A

Alarm settings screen

2. Press the

CURSOR PAD

up or down to highlight the

desired alarm setting.

To turn off an alarm setting, press the

ALARM ON/OFF

key. When done, press the

ACCEPT

key (or press

CANCEL

to leave the alarm on).

To change the distance setting for the cross-track, arrival
radius, or anchor drag alarms, highlight the desired alarm
setting, then use the

KEYPAD

to enter the distance at

which you want to be alerted. If necessary, press the

LEFT

ARROW

and

RIGHT

ARROW

to move the cursor into the

desired decimal place. When done, press the

ACCEPT

key

(or press

CANCEL

to leave the value unchanged).

Understanding the

alarm audio

The alarm audio for most of the alarms can be turned off,
which means

the alarms won’t beep for any of those alarm

situations. However, even with the alarm audio off, you’ll still
see the alarm messages displayed onscreen.

You can set the alarms to emit seven different levels of sound
from low to high, or else turn the alarm audio off. The

Summary of Contents for 961





















































































































































































































































































































































































































Search results

Summary of Contents for 961

Reviews:

Related manuals for 961

Brands by name

Popular brands

NorthStar 961, Reference Manual

Search results

Summary of Contents for 961

Reviews:

Related manuals for 961

Brands by name

Popular brands