NorthStar 961 Reference Manual Download

Page: 266 / 404

Chapter 12 - Alarms, TideTrack, Currents, and Echo Sounding

Page 12-16

961/962 Operations and Reference Manual, Rev. A

Adding the current

station overlay

To add current-station information to the

CHART

screen:

1. At the

CHART

screen, press the

OVERLAY

key, then press

the

SHOW CURRENTS

key.

If current stations are in the area, they’re displayed on the

CHART

screen, the

GRAPH ON

key appears, and a

STATION COVERAGE

bar (replacing an

INFO BAR

)

shows today’s date and time and the number of stations

within the coverage area.
If the

STATION COVERAGE

bar says there aren’t any

stations in the coverage area, press the

OUT

key to zoom

out to a wider coverage area (the

GRAPH ON

key will

appear). If the

STATION COVERAGE

bar says there are

too many stations, press the

key to zoom in to a

smaller coverage area (the

GRAPH ON

key will appear).

In either case, you can also press the

CURSOR PAD

change the coverage area.

Chart screen with current stations and station coverage bar

Selecting current

stations on the

chart screen

Choosing vessel-location current stations

To select the current station nearest to your vessel and view its
current data graphically (if you have the tide overlay enabled,

Summary of Contents for 961





















































































































































































































































































































































































































Search results

Summary of Contents for 961

Reviews:

Related manuals for 961

Brands by name

Popular brands

NorthStar 961, Reference Manual

Search results

Summary of Contents for 961

Reviews:

Related manuals for 961

Brands by name

Popular brands