NorthStar 961 Reference Manual Download

Page: 276 / 404

Chapter 13 - Customizing Setup Functions

Page 13-6

961/962 Operations and Reference Manual, Rev. A

To set the tide height measurement:

1. Press the

CURSOR PAD

to highlight the

TIDE HEIGHT

field, then press the

EDIT

key.

2. Press the

CURSOR PAD

left or right or press the

ARROW

keys to select either

AUTO

FEET

METERS

3. When done, press the

ACCEPT

key (or

CANCEL

to leave

the units unchanged).

4. Press

RETURN

to go back to the

SETUP MENU

screen.

Maximum number

of saved waypoints

When you use the

SAVE

key to save a waypoint, a sequential

waypoint number (

*SAVED00*

*SAVED01*

*SAVED02*

, and

so on) is automatically saved for each waypoint. When the
sequential number reaches the designated value you set in the

SAVE WPTS

field, the number starts over at 00, and overwrites

the saved waypoint previously designated as number 00.

You can set the maximum number of

*SAVEDXX*

waypoints

to 10, 20, or 100 waypoints. For many applications, you may
want to set this maximum number to 10, provided you
promptly rename any *

SAVEDXX*

waypoints you want to

retain before they’re overwritten. The factory default setting is
100

*SAVEDXX*

waypoints.

To change the maximum number of *

SAVEDXX*

waypoints:

1. At the

DISPLAY SETUP

screen, press the

CURSOR PAD

highlight the

SAVE WPTS

option, then press the

EDIT

key.

2. Press the

CURSOR PAD

left or right or press the

ARROW

keys to select either

, or

100

3. When done, press the

ACCEPT

key (or

CANCEL

to leave

the option unchanged).

Your

*SAVEDXX*

waypoints are now automatically

numbered up to the value you’ve set, at which point
previously saved waypoints will start to be overwritten.
To permanently save a

*SAVEDXX*

waypoint, rename it

with an original name—before it is overwritten.

4. Press

RETURN

to go back to the

SETUP MENU

screen.

Summary of Contents for 961





















































































































































































































































































































































































































Search results

Summary of Contents for 961

Reviews:

Related manuals for 961

Brands by name

Popular brands

NorthStar 961, Reference Manual

Search results

Summary of Contents for 961

Reviews:

Related manuals for 961

Brands by name

Popular brands