NorthStar 961 Reference Manual Download

Page: 316 / 404

Chapter 13 - Customizing Setup Functions

Page 13-46

961/962 Operations and Reference Manual, Rev. A

version, overwrite the existing version, or never replace
the existing version:

To ensure that the most recent charts are loaded, press
the

NEWEST VERSION

key.

To always replace installed charts, press the

ALWAYS

OVERWRITE

key.

To never replace existing charts, press the

NEVER

OVERWRITE

key.

The

LOADING CHARTS

dialog box is displayed, then the

INSERT HCRF CD

dialog box, which prompts you to

insert the appropriate Chart CD into the drive, if

necessary.

7. Remove the Update CD from the drive (keeping this CD

nearby since you’ll need it again), and insert the Chart
CD.

8. Press the

key.

The charts are loaded. At the

INSERT HCRF CD

dialog

box, you are then prompted to insert the same Update CD

back into the drive.

9. Remove the Chart CD from the drive and insert the same

Update CD.

10. Press the

key.

The charts are updated. The

LOADING CHARTS

dialog

box is displayed, followed by the

HCRF SUMMARY

dialog

box. Each chart loaded is represented by a different

horizontal line, with loading details for the highlighted line

displayed at the bottom (press the

CURSOR PAD

up or

down to highlight each individual chart).

The far-left

column displays either the word

, or an error number, if

any. If an error number is displayed, write this number

down and see “Table 12: HCRF chart errors” on page

13-55.

Summary of Contents for 961





















































































































































































































































































































































































































Search results

Summary of Contents for 961

Reviews:

Related manuals for 961

Brands by name

Popular brands

NorthStar 961, Reference Manual

Search results

Summary of Contents for 961

Reviews:

Related manuals for 961

Brands by name

Popular brands