Northstar
EXPLORER 550/550i
Installation and Operation Manual
24
5-2-3 Editing a waypoint
Editing a waypoint from the chart display
1 In the chart display, move the cursor to the
waypoint to edit.
2 Press
and select
Edit.
3 Change the waypoint data (see section 5-2-7).
Select
Save.
Editing a waypoint from the waypoints
display
1
In the waypoints display, press
or
to
highlight the waypoint to edit. Press
and select
Edit
.
2
Change the waypoint data (see section
5-2-7). Select
Save
.
5-2-4 Displaying a waypoint on the chart
This goes to the chart display, and shows the
selected waypoint at the centre of the display.
1
In the waypoints display, press
or
to highlight the waypoint to display. Press
and select
Display.
Or, in the Chart display, press
, select
Find,
then select
Waypoints.
Select a
waypoint from the list.
2
The EXPLORER switches to the chart display,
with the selected waypoint at the centre of
the chart.
5-2-5 Deleting a waypoint
5-2-6 Deleting all waypoints
1
In the waypoints display and press
and select
Delete all.
2 Select
Yes
to confirm.
To change the waypoint data when it is displayed
in a window:
1
Select the data to change.
Press
.
Use the cursor keys to change the data.
Press
.
2
If necessary, repeat the above step to
change
other
data.
3 Select
Save.
5-2-7 Changing a waypoint’s data
!
WARNING
When a waypoint is deleted from a route,
check that the changed route does not cross
land or dangerous waters.
A waypoint can not be deleted if the boat is
navigating to it or if the waypoint is used in more
than one route. A waypoint that is used in one
route can be deleted.
Deleting a waypoint from the chart display
1
In the chart display, move the cursor to the
waypoint to delete.
2 Press
and select
Delete.
3 Select
Yes
to confirm.
Deleting a waypoint from the waypoints
display
1
In the waypoints display, press
or
to highlight the waypoint to delete. Press
and select
Delete.
2 Select
Yes
to confirm.
