User Manual: VisionShare Series
26
C.
Appendix
1.
Charge Your Transmitter
1.
Place the power station on the designated location
(e.g. conference table).
2.
Connect the power adapter set to the charging dock and power
outlet.
3.
Place the transmitters in the slots of power station.
A flashing light indicates that the transmitters are charging.
4.
When the battery is fully charged, remove the transmitter (s)
from the power station.
Install the Transmitter to the Power Station
Important: First Time Battery Charge
Charge the transmitters for six hours before first-time use.
DC IN
Power
Adapter
Power
Outlet
