User Manual: VisionShare Series
27
2.
Receiver Installation
2.1
Wall Mount installation
You can install the receiver onto a wall or ceiling.
To install the Receiver on the wall:
1.
Use two wall-plugs and screws and install to the location.
2.
There are two hook slots in the bottom of receiver.
Mount the receiver on the wall and make sure it is secured.
3.
Connect the power adapter set to the receiver and power
outlet.
4.
Do not place the receiver in a closed cabinet.
Note:
Install the receiver to a flat and stable location.
Select the proper plug adapter and install to the
power adapter.
Receiver
Power Outlet
Display Device
