6
STEP 4.
Align the holes in the wall bracket (E) with the pilot holes and drywall anchors. Thread
wood screws (B) through washers and holes in the wall bracket, then directly into the wall studs
and/or drywall anchors. Make sure bracket is level. Tighten all screws securely with a screwdriver.
ALWAYS unplug
this fireplace heater
before assembly
or
cleaning, or before
relocating.
Failure to do so could result in
electric shock
,
fire
, or
personal injury
.
STEP 5. A.
With the help of a capable adult, lift the fireplace (A) and align the hooks on the back of
the fireplace with the slots on the wall bracket. Carefully set the hooks into the slots.
B
. Secure the fireplace to the wall bracket with two M4x8 metal screws (D), one on each side.
Thread the screws through the fireplace and into the wall bracket side tabs. Tighten both screws
with a Phillips screwdriver. The unit may now be plugged in.
B
B
B
B
B
B
A
D
E
E
B
B
E
A
