background image

17                                                                                                     

06089B-2 

 
 
 
 
 
 
 
 
 

OWNER’S MANUAL 

#

  

77519

 

ver.

06089B-2

 

Page: 17    ENGLISH CANADIAN VERSION

 

 

77519 English Canadian Version 06089B-2 ( For 
Use With The EC96601 New CPU Only) 

FLASH 

Pressing this button momentarily hangs up the phone to access custom calling features such 
as call Waiting or Three-Way Calling provided by your local phone company. For other 
custom calling features refer to the instructions provided by your local phone company.  
 

MUTE 

To talk privately without being over heard by the calling party, press and hold the MUTE 
button during a phone call. 
 

Call Timer 

The Easy Touch

 77519 features an Auto Call Timer witch automatically times calls starting 

5 seconds after the handset is picked up. The Call Timer will count the conversation time up 
to 59 minutes and  59 seconds when activated. The timer will be stopped by pressing the hook 
switch or returning the handset to the cradle of the base. The Call Timer stays on 
approximately 3 seconds after the time is stopped and returns to the standby mode.

 

 

GLOSSARY 

Blocked Name / Number - 

In some areas, callers may be able to block their name or phone 

number from appearing on the Caller ID LCD display.     

 

Call Back - 

This one-touch Call Back feature automatically dials the phone number of the 

selected caller by pressing  this button.

 

 

Call Record - 

Caller ID information which is stored in the Caller ID’s call memory.  

 

 

Call Memory - 

A storage area where call records are placed.  The  77519 can store up to 70 

call records.

 

 

Message Waiting - 

An optional message service provided by your local phone company.   

Please check with your local phone company regarding availability and additional 
information regarding Message Waiting service.

 

 
Multiple Data Message Format (MDMF) -  

This Caller ID message format includes the 

caller name, caller phone number, date of call, and time of call. 

 

O u t-of-Area Call - 

This is a call from an area where Caller ID service is not offered or an 

area that is not yet providing CID delivery to your area via the long distance network 

 

Ringer Equivalence Number (REN) - 

A number located underneath the base of your 

phone(s) or phone-related device.  The REN is used to determine how many phones can be 
connected to the telephone line while still having all those devices ring when you receive a 

Summary of Contents for 77519
























Reviews: