Northwestern Bell BELL Phones EXCURSION 36882, Owner'S Manual

36882 English I/B ver. 11202A-1

11202A-1 

              14 

OWNER’S MANUAL 

#  36882 

ver. 

11202A-1 

Page : 14             ENGLISH VERSION 

 TALK  

0   

05

 
 
 
 
         Call Timer Display 

Using the Base Unit 

1.  When the phone rings, the base unit 

LCD Panel will show “RING”. If you 
have Caller ID, the LCD Panel will 
show the Caller ID information after 
the first ring. 

2.  Press the SPEAKER Button 
3.  When you are finished with your 

conversation, press the SPEAKER 
button again. 

NOTE:

 When an incoming call is received 

and the base unit ringer switch is set to 
“OFF”, the base unit will not ring but the 
IN USE LED indicator will blink rapidly. 
Set switch to “ON” for normal use. 

Redial Feature 

Using the Handset

1.  If you get a busy tone, press the TALK 

button or place the handset on the base 
unit to hang up. 

2.  Later, press the TALK button again. 
3.  Listen for a dial tone. 
4.  Press the SAVE/REDIAL button. This 

will automatically redial the last 
telephone number you called. 

5.  When you have finished with your call, 

press the TALK button again or place 
the handset on the base unit. 

Using the Base Unit 

1.  Press the SPEAKER button. 
2.  Listen for a dial tone. 
3.  Press the SAVE/REDIAL Button to 

automatically dial the last number you 
called. 

NOTE:

  The handset and base unit 

REDIAL functions are independent from 
each other.  

Intercom Function 

You can have a two-way conversation 
between the handset and base unit through 
the INTERCOM feature. 

Activating the Intercom using the Base 
Unit 

1.  Press the INT/MENU Button on the 

base unit. 

2.  The handset emits rapid beep sound. 
3.  The handset user can respond by 

pressing the INT/MENU button and 
start conversation with the caller from 
the base. The base unit IN USE LED 
indicator will blink rapidly. 

Activating the Intercom using the 
Handset 

1.  Press the INT/MENU Button on the 

handset. 

2.  The base unit emits a rapid beep 

sound. 

3.  The base unit user can respond by 

pressing the INT/MENU Button and 
start conversation with caller from the 
handset.   

To end the Intercom Mode 

Press the INT/MENU Button on the 
handset or on base unit to end the 
conversation using the INTERCOM mode. 

Transferring Calls 

This allows you to transfer a call from the 
handset to the base unit, or vice-versa. 

Transferring Calls from the Handset to 
Base Unit 

• 

During a phone conversation through 
the handset, press the INT/MENU 
button on the handset. The base unit 
emits a rapid beep sound and 
simultaneously the IN USE LED 
indicator blinks rapidly. If the base 
unit user does not respond, press the 
INT/MENU button again to return to 
the call. 

• 

The base unit user can press the 
INT/MENU button to answer. An 
intercom link between the handset and 

Minutes 
Seconds