Memory Dialing
You can store and recall up to 10 frequently called telephone numbers (up to 16 digits each) from the
handset. Storing Telephone Numbers into Memory:
1. Finsure that the base unit IN USE/CHARGE LED indicator is off and the handset is in standby
mode(ON-HOOK).
2. Press the MEMO button on the handset.
3. Press a memory location where you want to store the phone number (from 0 to 9).
4. Dial the phone number you want to store. You will hear one confirmation beep.
5. Press the MEMO button to confirm.
6. To store more phone numbers or modify existing numbers in memory, repeat steps 1-5.
NOTES:
• The maximum number of digils thai can be stored for each phone number is 16 digits both in pulse
and tone mode.
Dialing a Number from Memory
1. Pick up the handset and press the TALK button.
2. Press the MEMO buuon.
3. Press the memory location (0-9) on the keypad for the number you have stored. The stored number
will be dialed automatically.
NOTE: If you have difficulty storing or recalling numbers from memory, refer to the "Troubleshooting"
chart of this user manual.
Changing Stored Phone Numbers
1. follow the steps described in "Storing Telephone Numbers into Memory".
2. The new phone number will automatically replace the previous one.
PACK Function
To alert the handset user or to locate the misplaced handset, press the PAGE button on the base unit.
Pressing this button will activate the handsel to beep for one (I) minute, provided the handset is located
within transmitting range. Press again to slop.
NOTE: Even if the handsel is in RING OFF mode, the base unit can page the handset.
Low Battery Warning
When the handset battery voltage level is low. ihe handset BATTERY LOW LED Indicator on the handset
will start to blink and a beep sounds. Return the handset to its cradle on the base unit for charging.
65,536 Combination Security Coding
The cordless telephone have a digital coding security system to prevent unauthorized use of your
telephone line by other cordless phones nearly. The cordless telephone have 65.536 possible security code
combinations. Each combination of the code is randomly generated every time the handset is picked up.
Resetting Security Code and Channel
Communication between the handsel and die base unit tnaj not be possible in any of the following
situations:
1. Alter a power failure.
2. After relocating the base unit by disconnecting the AC adapter.
3. After replacing the handsel bailer)'.
12 041505A-1
