background image

22

02252A-1

                        10  12:00

PM

  12/25

DEL ALL CID?

    

                       CALL#

                    

NEW

 10  12:00

PM

  12/25

817-456-7890
DIAL NO?        SAVE

B. DELETING ALL CALL RECORDS

1.

In standby mode, press the handset's MENU button.

2.

Press UP or DOWN button to search for "BASE MENU".

3.

Press OK button to select.

4.

When LCD Display shows DEL CALLER ID, press OK button to select. The
new and total Call Records will be shown.

5.

Press DELETE button once and the unit asks if you
want to delete all Call Records.

6.

Press the OK button to delete all Call Records or
press CANCEL button if you do not wish to delete.

7.

Press CANCEL button to return to standby mode.

DIALING FROM CALL RECORDS

1.

In standby mode, press UP or DOWN button to enter Call Records. The new
and total Call Records will be shown.

2.

Press UP or DOWN button to find the desired Call Record.

3.

Press OK button once and the unit asks if you want to dial the number or,

4.

Press DOWN button to select call number.

a. One time to dial  out of area code +area code+7 digits
b. Two times to dial area code+7 digits
c. Three times to dial 7 digits

5.

Press the OK button and the unit will automatically dial the selected tele
phone number.

CALL WAITING ID OPERATION

Call Waiting ID lets you know who is on call waiting while you are still using the
telephone. Before, only a tone alerts you if you have a call waiting. Now, the
Excursion

®

 36570 can also show the Caller Identification on Call Waiting (CIDCW)

information using the LCD Display.

NOTE:

 During conversation and the Call Waiting signal comes in, you will hear

the data signal. Before you use these features on your Excursion

®

 36570

telephone, you must first subscribe to the services through your local telephone
company.
When the Call Waiting signal is heard on the receiver, the LCD Display will show
the name and number just like regular Caller ID.
The Call Waiting ID Records are stored, reviewed, redialed and edited the same
as regular Caller ID Records. Please refer to the CALLER ID OPERATION sec-
tion for more details.

36570/02252A-1.PUT

5/26/01, 11:35 AM

23

Summary of Contents for Excursion 36570





































Reviews: